DC INPUT CHARACTERISTICS:
● Input connector type: 7A/300V Single table type Terminal 4 pinl
● Input Current: 10A/12A(100W) @Full Load High Line & Low Line
● Inrush Current: Less than 15A(12v)/10A(24v)/5A(48v) Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS:
OVERALL PERFORMANCE:
● Efficiency: 85% typical @ Full Load
● Hold up time:
● Rise time:
● Power Good Signal: TTL Compotible signal, on delay 100-500ms, off delay 1ms min
● Short Circuit Protection (SCP): All output with SCP (shutdown and latch off)
● Over Power Protection (OPP): Peak power protected to 130%±10% of continuous rated power (shutdn and latch off)
● Over Voltage Protection (OVP): +5V, +12V, +3.3V
RELIABILITY:
● MTBF (Mean Time Between Failure): >60,000 hours @max. Load, 12V, 24V, 48V DC & 25°C ambient
● Safety Standards: Meet UL60950, TüV EN60950
● Safety Approved:
● EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPR22 (EN55022) Class B (CE mark)
● Dielectric Withstand Input to Output: 1500Vac for 1second
● Dielectric Withstand Input to Frame Ground: 1500Vac for 1second
● Leakage Current: Non
Input & Output Device Connector Specific:
● ATX 20pin x1 : Molex 39-01-2200 or equivalent
● +12v(P4) 4 Pin x 1: Molex 39-01-2040 or equivalent
Power Chassis Dimension:
● 193(L) x 42(w) x 40(H)mm
● 68.11(L) x 15.748(w) x 13.78(H) Inches