DC INPUT CHARACTERISTICS:
● Input connector type: 40A/ 300V Single table type Terminal x 2
● Input Current: 17A/32A(200W) & 22A/40A(250W) @Full Load High Line & Low Line
● Inrush Current: Less than 10A Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS:
OVERALL PERFORMANCE:
● Efficiency: 70% typical @12V DC Input Full Load
● Hold up time:
● Rise time:
● Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min.
● Short Circuit Protection (SCP): All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP): Peak power protected to 130%±10% of continuous rated power (shutdn and latch off)
● Over Voltage Protection (OVP): +5V, +12V & +3.3V
RELIABILITY:
● MTBF (Mean Time Between Failure): 60,000 hours @max. Load, 12V DC & 25°C ambient
● Safety Standards: Meet UL60950 and TüV EN60950
● Safety Approved:
● EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPER22 (EN55022) Class B (CE mark)
● Dielectric Withstand Input to Output: 1500Vac for 1sec
● Dielectric Withstand Input to Frame Ground: 1500Vac for 1sec
● Leakage Current: <0.75mA @250Vac
Output Connector specific:
● ATX 20 Pin x1 Molex39-01-2200 or equivalent
● +12V(P4) 4 Pin x1 Molex 39-01-2040 or equivalent
● HDD, DVD 4 pin x1 Molex 8981-04P or equivalent
● FDD 4 pin x1 AMP171822-4 or equivalent
● Serial ATX Molex 675820000 or equivalent
● ATX 24 Pin x1 Molex 39-01-2240 or equivalent - optional
Standard Output Cable Length:
● 550mm
Power Chassis Dimension:
● STC-12200I 100(W) x 205(L) x40(H) mm
● STC-12250I 100(W) x 240(L) x40(H) mm
● STC-12300I 100(W) x 240(L) x40(H) mm
Net Weight:
● 2kg
Gross Weight:
● 2.1~2.4kg
Packing Detail:
● 8pcs
Measurement of Carton:
● 1Cuft
For the latest info regarding this product, please visit
www.synoceantech.com