DC INPUT CHARACTERISTICS:
● Input connector type 30A/ 300V UL Approved Gold plated 3-Pin Terminal 1.2t/3-Pin Terminal
● Input Current 30A/20A(max.) @Full Load & Low Line
● Inrush Current Less than 10A Cold start @25пїЅC ambient
DC OUTPUT CHARACTERISTICS:
OVERALL PERFORMANCE:
● Efficiency 70% typical @24V DC Full Load
● Hold up time
● Rise time
● Power Good Signal TTL Compatible signal, on delay 100~500ms, off delay 1ms min
● Short Circuit Protection (SCP) All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP) Peak power protected to 130%пїЅ10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP) +5V, +12V & +3.3V
RELIABILITY:
● MTBF (Mean Time Between Failure): >50,000 hours @max. Load, 24V DC & 25пїЅC ambient
● Safety Standards: Meet UL60950 and TГјV EN60950
● Safety Approved:
● EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPER22 (EN55022) Class B (CE mark)
● Dielectric Withstand: Input to Output: 1500Vac for 1second
● Dielectric Withstand: Input to Frame ground: 1500Vac for 1second
● Leakage Current: <0.75mA @250Vac
Output Connector specific:
● ATX 24 Pin x 1: Molex39-01-2240 or equivalent
● +24V(P4) 4 pin x1: Molex 39-01-2040 or equivalent
● Peripheral 4 pin x7: Molex 8981-04P or equivalent
● FDD 4 pin x1: AMP171822-4 or equivalent
● Serial ATX x 2: Molex 675820000 or equivalent
● Process 8 pin x1: Molex 39-01-2080 or equivalent
Standard Output Cable Length:
● 520mm
● 20.47 Inches
Power chassis Dimension:
● 140(L) x 150(W) x 86(H) mm
● 5.51(L) x 5.9(W) x 3.38(H) Inches
500W
● 170(L) x 150(W) x 86(H) mm
● 6.69(L) x 5.9(W) x 3.38(H) Inches
Главная 
